一.用途Use
用于測試橡膠及其制品的耐臭氧老化性能設備執行(滿足)相關標準:
JIS K 6259ASTM1149 ISO1431 GB/T7762GB/T13642等
It is used to test rubber and rubber products ozone proof functions, and applied to: JIS K 6259ASTM1149 ISO1431 GB/T7762GB/T13642 Etc.
二.基本原理Basic Principle
臭氧在大氣中的含量很少卻是橡膠龜裂的主要因素,臭氧老化箱模擬和強化大氣中的臭氧條件,研究臭氧對橡膠的作用規律,快速鑒定和評價橡膠抗臭氧老化性能與抗臭氧劑防護效能的方法,進而采取有效的防老化措施,以提高橡膠制品的使用壽命。
Ozone in air takes up a little proportion, but it is the main reason for crack of rubber, Ozone ageing test chamber imitates and strength the ozone in air, investigate the rule of ozone to rubber and identify, evaluate rubber ozone proof function, then take measures to improve rubber product
三.主要特點Main features
*符合國際標準的不銹鋼試驗倉及無聲放電制造臭氧的全封閉氣體回路,整個臭氧氣體的發生和捕捉均是密閉的回路,確保人身安全。
It is applied to international standard and keep safety of persons.
*在1000pphm的范圍內任意設定臭氧濃度。
During1000pphm ozone concentration can be set at random.
*調速電機驅動試樣架裝置(滿足靜態法拉伸試驗,試件運行軌跡滿足擺線軌跡原理)
Speed electric machine drive sample frame configuration( satisfy static stanching test, test products running track is fit for cycloid motion theory)
*臭氧濃度自動數顯控制儀.
Ozone concentration auto digital display controlling instrument.
*雙光束“QUA”非色散紫外臭氧檢測儀.
Double light beam QUA out of dispersion ultra ozone detection instrument
*數顯自動在線測量.
Digital display measurement on line automatically.
*留有計量檢定校正接口.
Measurement adjustment interface
*臭氧濃度/溫濕度設定值控制PID自整定,操作方便可靠.
Ozone concentration/temperature and humidity set value controlling PID auto setting
*第3代比爾-朗伯測量應用軟件.
Third generation Bill-lanbo measurement application software
*安全門鎖控制系統
Security gate lock controlling system
四.主要技術參數Main technical data
*工作室體積:500×500×500
Working dimensions: 500×500×500
*臭氧濃度:0~1000 pphm(設定直讀)
Ozone concentration: 0~1000 pphm(設定直讀)
*臭氧濃度偏差:國標10%
Ozone concentration deviation: National standard 10%
*試驗倉溫度:測量范圍室溫~+80℃
Test chamber temperature: Measurement range RT~+80℃
*溫度均勻度:±2℃
Temperatureuniformity:±2℃
*相對濕度:測量范圍60%以上
Relative humidity: test range above 60%
*試樣架回轉速度:0~50mm/s
Test sample frame rotary rate: 0~50mm/s
*動態拉升頻率:0.5Hz
Dynamic rising frequency: 0.5Hz
*新型試樣架(每個夾具能安裝試驗件拉伸能滿足Ⅰ型啞鈴片和實際工件)
New test frame ( Each lamp can be set test pieces, it can satisfy dumbbell pieces and real workpieces)
*試驗氣體流量:0-60L/min
Testing gas flow: 0-60L/min
五.設備主要材質
*外殼冷板噴塑/內膽不銹鋼。Shell static painting/internal chamber is stainless steel
*AI數顯智能程控調節儀。Al digital intelligent program adjustment equipment
*氣體流量計,精確控制各層面氣體流量。Gas flow indicator
*無聲放電臭氧發生器,配“QUA”非色散紫外臭氧檢測儀Silent discharge ozone generator, with“QUA” none-dispersion ultra ozone detector
*比爾-朗伯原理測量應用軟件(國際公認)。Bill-Lanbo principle testing application software
*裝有氣體凈化器,恒溫槽,Gas purifier and thermostatic bath
*活性碳吸收和硅膠干燥塔。activated carbon adsorption and silica gel drying
*含臭氧氣流與試樣平行。Airflow of ozone with test samples parallel
*選配遠程監控軟件(可用PC機打印試驗數據)(selectable) Long distancesupervising software(PC printing test data)
*備留有經典化學測試臭氧濃度之接口. Chemical test for ozone concentration interface
*內部設置穩壓電源stabilized voltage supply inside
六.安全保護裝置Security protection configuration
*電源超載、控制回路過載、短路保護Over power, circuit breaker protection, control loop over load
*接地保護,電機過載保護Electrical machine over load protection, ground protection
*超溫保護Over temperature protection
*報警訊響提示Alarming reminder
本頁產品地址:http://m.bhxfsw.cn/sell/show-1792.html